Coaxial to Rectangular Waveguide |
|
Model 7061 & 7063 Adapters consists of a section of waveguide flanged on one end terminated with a smooth polished flat on the other end. A N(F) or SMA(F) type connector on the broad - wall of the waveguide with pin assembly is so mounted that a low VSWR is achieved over the entire frequency-band.
These adaptors works as a loss - less transition from rectangular waveguide to Coaxial line or vice versa.
These are available with N(M) type or SMA (M) or any other
connectors also :-
|
Model NO. |
Frequency Range |
Max. |
Waveguide Type |
Flanges Type |
Coaxial |
|
(GHz) |
VSWR |
(WR-) |
(UG-/U) |
Connector |
L-7061 |
1.70-2.60 |
1.30 |
430 |
CPR-430 |
N(F) |
S-7061 |
2.60-3.95 |
1.30 |
284 |
53 |
N(F) |
C-7061 |
3.95-5.85 |
1.30 |
187 |
149A |
N (F) |
J-7061 |
5.85-8.20 |
1.30 |
137 |
344 |
N(F) |
X-7061 |
8.20-12.4 |
1.30 |
90 |
39 |
N(F) |
Ku-7061 |
12.4-18.0 |
1.30 |
62 |
419 |
N(F) |
K-7063 |
18.0-26.5 |
1.30 |
42 |
595 |
SMA (F) |
R-7063 |
26.5-40.0 |
1.30 |
28 |
599 |
SMA(F) |
|
| |
Note: Low VSWR Adaptor may be supplied over narrow
frequency-range |
| |
|
|
|
|
| |
|
|
| |
|
|
| Tapered Waveguide |
|
Model 9051 transitions are meant for connecting the circular waveguide to the corresponding rectangular waveguide or vice versa. These are so designed to give lowest VSWR through out the frequency band.
These are fabricated by precise and well-controlled electroforming process.
Please mention the size & drawing of the flanges particularly on the round waveguide side.
|
| |
Model NO. |
Frequency Range |
Max. |
Waveguide Type |
Flanges Type |
|
(GHz) |
VSWR |
(WR-) |
(UG-/U) |
S-9051 |
2.60-3.95 |
1.12 |
284 |
53 |
C-9051 |
3.95-5.85 |
1.12 |
187 |
149A |
J-9051 |
5.85-8.20 |
1.12 |
137 |
344 |
X-9051 |
8.20-12.4 |
1.12 |
90 |
39 |
Ku-9051 |
12.4-18.0 |
1.15 |
62 |
419 |
K-9051 |
18.0-26.5 |
1.15 |
42 |
595 |
R-9051 |
26.5-40.0 |
1.15 |
28 |
599 |
V-9051 |
50.0-75.0 |
1.20 |
15 |
385 |
W-9051 |
75.0-110.0 |
1.20 |
10 |
387 |
|
| |
| Note : Circular W.G. will have round-flanges. Frequency-range will be corresponding to that of round waveguide. |
| |
|
|
|
|
| |
|
|
| |
|
|
| |
| Rectangular to Circular Waveguide |
|
|
Model 9071 Waveguide Taper Transition provides the interconnection between different adjoining waveguide system or components. These transitions are designed to have low VSWR (Max. 1.10) throughout the frequency band. Flanges for the corresponding waveguide are provided on both ends. Some of the transitions as mentioned below are stocked for fast delivery. |
| |
1. WR-510toWR-430 |
8. WR-137 to WR-112 |
2. WR-430 to WR-340 |
9. WR-112 to WR-90 |
3. WR-340 to WR-284 |
10. WR- 90 to WR - 75 |
4. WR-284 to WR-229 |
11. WR- 75 to WR - 62 |
5. WR-229 to WR-187 |
12. WR-62toWR-51 |
6. WR-187toWR-159 |
13. WR-51 toWR-42 |
7. WR-159to WR-137 |
14. WR- 42 to WR - 28 etc. |
|
| |
| Please mention frequency-range, flange type & max. VSWR when ordering. |
| |
|
|
|
|
| |
|
|
| |
|
|
